eacyreach
Shop on Amazon
eacyreach
Shop on Amazon

Share this on

Link Linkedin Facebook

Searching for a battery pack / UPS for your IoT Devices?

24V UPS for IOT Device

Are you looking to provide battery backup or a UPS for your IoT Device?
Does your device operate on 12V / 24V Input supply?

If these are the two questions that you have in mind, then you we have a right solution for you.
There are many devices on field such as RTU, Flow Meters, CCTV Cameras, Process Controllers, Diagnostic Devices, HMI, Valves, Pressure gauges, vibration monitors, etc. that need power supply. Laying the power cable may become expensive and, in some cases, not feasible. To address these situations, technical team tends to make a custom battery arrangement. However, there are many different challenges that are faced

  1. The solution becomes very expensive as each component is purchased in lesser quantity e.g. Battery, SMPS etc.
  2. To get the best efficiency from Battery the BMS circuit becomes important. However, getting BMS in place is a difficult task
  3. Enclosing the setup in a compact manner becomes a challenge. Reliability Testing of power supply is crucial

EasyReach UPS for IoT devices provides an easy option. The small size UPS can be attached to your IoT equipment using its 5 PIN Connectors. The CE & RoHS certification provides product reliability. Compact UPS brings the elegance to the product. Finally, this all is achieved in much cost-effective manner.

Shop on Amazon
Shop on Amazon

Shop on Amazon

Share this on

Link Linkedin Facebook

Amol Vedak

Co-founder, EasyReach

Sign up for our newsletter

By clicking Sign Up you’re confirming that you agree with our Terms and Conditions.

Similar Blogs

48V Power Adapter

Previous slideNext slide Introduction A 48V adapter is a type of power converter that converts alternating current (AC) from a mains power supply to direct current (DC) at 48 volts. The 48-Volt Adapter is commonly utilized in applications that require a high-power DC supply, such as telecommunications equipment, data center power systems, industrial automation, power over Ethernet, and renewable energy. 48V Adapter Use Case 48V adapters are commonly used in various devices, including: Telecommunication Industry :-  In the telecommunications industry, such as routers, switches, and other network devices. Industrial Automation Industry :- In the automation industry, 48V adapters are used to power industrial equipment, such as motors, pumps, and other devices that require a higher voltage output. Data Centers :- In data centers, 48V adapters are used to power servers, storage systems, and other equipment that require a reliable power source. PoE (Power over Ethernet) Devices :-  In PoE applications, a 48V adapter is used to power devices, such as IP cameras, VoIP phones, and access points over Ethernet cables. Renewable energy system :- A 48V adapter can be used in renewable energy systems (RES) to charge 48V battery banks, making it perfect for disconnected solar, wind, and hybrid power systems. Also, it may power DC loads such as LED lights, fans, and pumps in many kinds of renewable energy applications. Benefits of a 48 Volt Adapter AC to DC There are various benefits to using a 48-volt AC-to-DC adapter: Efficient Power Conversion: These adapters are highly efficient, resulting in less energy loss and heat emission. Reliability: 48-volt AC to DC adapters are designed to provide a reliable output, ensuring that devices receive consistent power. Flexibility: These adapters can be utilized with a wide range of devices, including telecommunications equipment, data centers, and renewable energy solutions. Compact Design: 48-volt adapter AC to DC are often compact and lightweight, making them easy to integrate into existing systems. Conclusion In conclusion, 48-volt adapter AC to DC is an essential component in many modern applications. With their high efficiency, reliability, and flexibility, these adapters are powering a wide range of devices, such as telecommunications, data centers, or renewable energy systems. A 48-volt adapter AC to DC is an excellent option to consider.

Read More »
admin September 24, 2024

EasyReach 48V PoE adapter supporting WiMAX antenna – Maksat, Cambium, Radwin, HFCL etc.

Telecom operators use variety of antennas from different vendors such as Radwin, Cambium, Maksat, HFCL etc. in there B2B deployments. To ensure stable data network, It is important to provide reliable power supply to the antenna. The power supply needs to take into account different safety conditions such as power surges, short circuit, reverse polarity etc. The power supply also needs to comply to international certifications. 48V PoE adapter/injector by EasyReach powers various devices like WiMAX Antennas, LoRaWAN Gateways, PTZ Cameras, and more. It has 1Gb LAN port, which gives a stable and dependable connectivity for all your devices. It is certified under CE, RoHS, and meets all the safety standards, product is trusted by Telecom Operators, MVNO, WiFi network providers and enterprises. The device comes with variety of voltage configurations such as 48V / 30V / 24V. A brief list of antennas that are supported by EasyReach 48V / 30V / 24V PoE adapter is given below 1. Maksat | BTS-Maksat Pluto antenna | 24V | 0.5 Amp | 12 Watt | POE (4-5 Positive 7-8 Negative) | Passive adapter. 2. Maksat | CPE-Maksat Pluto antenna | 24V | 0.5 Amp | 12 Watt | POE (4-5 Positive 7-8 Negative) | Passive adapter. 3. Cambium | Cambium ePMP 1000 antenna | 30V | 0.8 Amp | 24 Watt | Positive :7,8 ,Negative 4,5) | Passive adapter. 4. Cambium | Cambium Force 300CSM antenna | 30V | 0.8 Amp | 24 Watt | Positive :7,8 ,Negative 4,5 | Passive adapter. 5. Cambium | Cambium Force 300CSML antenna | 30 V | 0.8 Amp | 24 Watt | Positive :7,8 ,Negative 4,5 | Passive adapter. 6. Cambium | Cambium Force 325 antenna | 30 V | 0.8 Amp | 24 Watt | Positive :7,8 ,Negative 4,5 | Passive adapter. 7. Cambium | Force 130 antenna | 24V | 0.8 Amp | 19 Watt | Positive :4,5 ,Negative 7,8 | Passive adapter. 8. Cambium | Cambium Force 190 antenna | 30V | 0.8 Amp | 24 Watt | Positive :7,8 ,Negative 4,5 | Passive adapter. 9. Cambium | Cambium Force 200L antenna | 30V | 0.8 Amp | 24 Watt | Positive :7,8 ,Negative 4,5 | Passive adapter. 10.  Radwin | Radwin HBS 5000-RW-5050-4B58 antenna | 24V | 1 Amp | 24 Watt | Positive :4,5 ,Negative 7,8 | Passive adapter. 11.  Radwin | Radwin HSU-RW-5525-4P58 antenna | 24V | 1 Amp | 24 Watt | Positive :4,5 ,Negative 7,8 | Passive adapter. 12.  Radwin | Radwin SU-PRO-RW-5H50-4P58 antenna | 24V | 1 Amp | 24 Watt | Positive :4,5 ,Negative 7,8 | Passive adapter. 13.  Radwin | Radwin 2000 C-RW-2450-A110 antenna | 24V | 1 Amp | 24 Watt | Positive :4,5 ,Negative 7,8 | Passive adapter. 14.  Radwin | Radwin 2000 A-RW-2450-A110 antenna | 24V | 1 Amp | 24 Watt | Positive :4,5 ,Negative 7,8 | Passive adapter. 15.  Radwin | Radwin 2000 A+-RW-2450-4350 antenna | 24V | 1 Amp | 24 Watt | Positive :4,5 ,Negative 7,8 | Passive adapter. 16.  Radwin | Radwin 2000 Alpha-RW-2450-6HC5 antenna | 24V | 1 Amp | 24 Watt | Positive :4,5 ,Negative 7,8 | Passive adapter. 17.  Radwin | Radwin HBS 5000-RW-5050-4B58 antenna | 24V | 1 Amp | 24 Watt | Positive :4,5 ,Negative 7,8 | Passive adapter. 18. HFCL | HFCL ion4l1_BTS antenna | 48v | 0.35 Amp | 17 Watt | 1, 2, 4, 5 for V+  & V- for pin 3, 6, 7, 8 | Passive adapter. 19. HFCL | HFCL ion4l2_CPE antenna | 24v | 0.63 Amp | 15 Watt | 1, 2, 4, 5 for V+  & V- for pin 3, 6, 7, 8 | Passive adapter. 20. HFCL | HFCL ion4l3_CPE antenna | 48v | 0.35 Amp | 17 Watt | 1, 2, 4, 5 for V+  & V- for pin 3, 6, 7, 8 | Passive adapter. 21. HFCL | HFCL ion4le antenna | 48v | 0.40 Amp | 19 Watt | 1, 2, 4, 5 for V+  & V- for pin 3, 6, 7, 8 | Passive adapter. 22. HFCL | HFCL ion4l3a antenna | 48v | 0.35 Amp | 17 Watt | 1, 2, 4, 5 for V+  & V- for pin 3, 6, 7, 8 | Passive adapter.

Read More »
admin May 6, 2024
24V UPS for IOT Device

Searching for a battery pack / UPS for your IoT Devices?

Are you looking to provide battery backup or a UPS for your IoT Device?Does your device operate on 12V / 24V Input supply? If these are the two questions that you have in mind, then you we have a right solution for you.There are many devices on field such as RTU, Flow Meters, CCTV Cameras, Process Controllers, Diagnostic Devices, HMI, Valves, Pressure gauges, vibration monitors, etc. that need power supply. Laying the power cable may become expensive and, in some cases, not feasible. To address these situations, technical team tends to make a custom battery arrangement. However, there are many different challenges that are faced EasyReach UPS for IoT devices provides an easy option. The small size UPS can be attached to your IoT equipment using its 5 PIN Connectors. The CE & RoHS certification provides product reliability. Compact UPS brings the elegance to the product. Finally, this all is achieved in much cost-effective manner.

Read More »
admin February 9, 2024

Telecom Platforms

Telecom Devices

IoT Platforms

IoT Devices

Industry 4.0

Retail Platforms

Retail Devices

Company

Address

Contact

Facebook Linkedin Youtube
  • Privacy Policy
  • Terms of Service
  • Cookie Settings
  • © 2024 EasyReach
    Designed by wubbl

Enhancing Telecom & Retail with Scalable, Reliable IoT Solutions.

Follow Us

Facebook Twitter Youtube
eacyreach
Telecom Platforms

Sign up for our newsletter

Telecom Platforms

Telecom Devices

IoT Platforms

IoT Devices

Industry 4.0

UPS for IoT

Wireless Technology

Blogs

About Us

Contact Us