12V UPS for CCTV Camera and DVR

The Camera and its equipment’s on field often experiences Power Cut, Uneven Power Supply and Power Fluctuations, which may cause service interruptions resulting into compromised security. Similar issue is faced by various IoT devices operating in field – RTU, Flow Meters, HMI, Wireless Routers etc. When the device looses power, the data is lost.

EasyReach Solutions has developed and implemented a 12V UPS for IoT devices and Security Cameras, which supports stable power supply and Power Backup of Up to 2 hours (based on power consumption of device).

Features of the solution are as follows;

  • Plug – N – Play Easyreach UPS + SMSP Adapter
  • Surge Control – Up to 2KVA
  • Uninterrupted Power Supply for Camera + DVR Equipment Up to 2 Hours
  • DVR 0.5 Amp and Camera 0.3 Amp x 4
  • IoT devices have variety of power requirements
  • Device is available in 12V / 24V variant
  • Battery Operated device
Easyreach UPS Based Adaptor for DVR and Camera
Specification Details/Description
Output Voltage Rating 5*12V DC Ports
Output Current Rating (Max) 1.5A
Output Connector 10 Pin Plug In Terminal Block 300V @ 8Amp
Input Voltage Rating AC 110 – 300 V
DVR Voltage and Current Rating 4 Cameras each 0.3 + 1 DVR with 0.5 Amp, 12V DC
Camera Voltage and Current Rating 12V DC @ 0.3A
Battery Type Li-Ion
Battery Cycle (Expected) 1000 Cycles
Battery Capacity 2000 mAH
Power Back up Time Up to 2 hours
Indicators Mains, Output and Low Battery
Dimensions (Proposed) 180 MM(L) x 60 MM (W) x 35 MM (H)
Approx. Weight <= 350 Grams
Enclosure Type Heat Resistant ABS
Surge Protection Upto 2KVA
Top